fiuk
homeservicesequipmentpartnerscontact



Yhtiömme kalusto koostuu 9 työpenkistä, joita ovat jyrsin-, sorvaus- ja muut penkit.

Alla on esitetty lisätietoa laitteista työlajien mukaan:

Horizontal Machining Centre OKUMA MA-50 HB – machining centre;

Max Machining Volume mm 700 x 800 x 700
X-axis column L/R mm 700
Y-axis spindle U/D mm 800
Z-axis table B/F mm 700
Spindle center to pallet surface mm 50 ~ 850
Spindle nose to pallet center mm 150 ~850
Rotary pallet size (2 pcs) mm 500 x 500
Indexing angle deg 1
Max load capacity kg 800
Max work dimension mm Ф 800 x 900
Bearing dia mm Ф 100 (ф 110)
Spindle speed 1/min 5000 (10000)
Magazine capaciti tools 40
Max tool dia (w/ adjacent ) mm Ф 140
Max tool dia (w/o adjacent )   Ф 240
Pallet changer   2-pallet rotary-shuttle
Positioning accuracy mm +/- 0.004/ full stroke
Repeatable positioning accuracy mm +/- 0015


OKUMA  LB300 –MW x 500 – sub-spindle turning and milling centre;


Swing over bed
mm ф 530
Swing over saddle mm ф 420
Distance between noses mm 760
Max turning dia mm Main: 370/ Sub: 260
X-axis mm 260 (185+75)
Z-axis mm 520
W-axis mm 520
C-axis   360 grad.(rotary axis control increments 0,001 grad)
Spindle speed 1/min Main: 45 ~ 4500 / Sub: 45 ~ 4500
Speed range   2 auto ranges
Spindle bore diameter mm Main: 62 / Sub: 53
Diameter at front bearing mm Main: 100 / Sub: 80
Tool shank height mm 25
Boring bar shank diameter mm Main only ф40 / Sub ф20
Indexing time   0.1 / index
Cutting feedrate mm/rev X, Z, W: 0.001 ~ 1000.000


Takisawa WAEX-508 – sub-spindle lathe;


Swing over bed
mm ф 550
Swing over saddle mm ф 440
Distance between noses mm 760
Max turning dia mm Main: 450       Sub:260
X-axis mm 260 (185+75)
Z-axis mm 520
W-axis mm 520
C-axis   360 grad.(rotary axis control increments 0,001 grad)
Spindle speed 1/min Main: 45 ~ 4500 / Sub: 45 ~ 4500
Speed range   2 auto ranges
Spindle bore diameter mm Main: 62 / Sub: 53
Diameter at front bearing mm Main: 100 / Sub: 80
Tool shank height mm 25
Boring bar shank diameter mm Main only ф40 / Sub ф20
Indexing time   0.1 / index
Cutting feedrate mm/rev X, Z, W: 0.001 ~ 1000.000


OKUMA  LB300 xC500 – lathe;


Swing over bed
mm ф 530
Swing over saddle mm ф 420
Distance between noses mm 760
Max turning dia mm Main: 370
X-axis mm 260 (185+75)
Z-axis mm 520
W-axis mm 520
Spindle speed 1/min Main: 45 ~ 4500
Speed range   2 auto ranges
Spindle bore diameter mm Main: 83
Diameter at front bearing mm Main: 100
Tool shank height mm 25
Boring bar shank diameter mm Main only ф72
Indexing time   0.1 / index
Cutting feedrate mm/rev X, Z, W: 0.001 ~ 1000.000


Vertical center  Mazak Nexus 510C-2 – vertical milling centre;


X-axis stroke L/R
mm 1050
Y-axis stroke B/F mm 510
Z-axis stroke U/D mm 510
Distance from column mm 576
Table size mm 1300x550
Max. load capacity kg 1200
Max. spindle speed rpm 12000
Spindle speed range   Stepless
Spindle taper   No. 40
Spindle acceleration sec 2.04
Tool shank   CAT No.40
Max. tool diam. mm 125
Tool change time sek 1.3


Mazak QUICK TURN Nexus 250 M – lathe.


Max. swing
mm 675
Swing over carriage mm 350
Max machining Dia. mm 380
Max machining length mm 504
Bar work capaciti mm 77
X-axis travel mm 230
Z-axis travel mm 575
Spindle speed rpm 4000
Spindle bore mm 88
Number of tools tools 12
Turning tool shank mm 25
Spindle speed rpm 4500


CNC Vertical milling center Mazak VCS 530C

Work table cross dimension mm 1,300
Work table longitudinal dimension mm 550
Spindle taper bore taper 7/24 No. 40
Rotating speed maximum min-¹ 12,000
X-axis mm/min 42,000
Z-axis mm/min 42,000
W-axis mm/min 42,000
Table work dimension (cross) mm 1,300
Table work dimension (longitudinal) mm 550
Magazine capacity (standard)   30
Tool shank CAT 40
Width mm 2,950
Length mm 2,929.0

Content on this page requires a newer version of Adobe Flash Player.

Get Adobe Flash player

contact information: kepax@kepax.ee | +372 6120 637